Brewhouse

We are partners with Jinan Innovative & Craft Beer Equipment located in China. Our brewhouses are well crafted with attention to details. Built in a carbon steel free plant, we use quality stainless only and we get it PMI tested to make sure the quality is maintained. Each vessels goes through an inspection before shipping. Any touch up will be done at the client’s location and the cost is covered by us.

The features and specs you will find here are the standards but buying a brewhouse is all about options and customization to your specific needs. Let me know what you are looking for and I will provide you an official quote.

MASH TUN

  • Volume + ~30% headspace
  • Inner-shell (SUS304L), thickness: 3.0mm;
  • External-shell (SUS304L), thickness: 2.0mm;
  • Oval cone thickness: 3.0mm;
  • Insulation: Rockwool-thickness: 100mm;
  • Internal mirror polishing, welds polishing to Ra 0.6μm;
  • Mash rakes standard on 10bbl+
  • Auto spent grain out by reversing rakes
  • Sparge arm; False bottom, Laser filter with 1.0mm gap;
  • PT100 Temperature sensor probe;
  • Spent grain manway
  • Glass manhole(glass): Φ500mm;
  • Balancing tank / grant
  • Tank light
  • CIP spray ball

KETTLE / WHIRLPOOL

  • Volume + ~50% headspace
  • Inner-shell (SUS304L), thickness: 3.0mm;
  • External-shell (SUS304L), thickness: 2.0mm;
  • Oval cone thickness: 3.0mm;
  • Insulation: Rockwool-thickness: 80mm;
  • Internal mirror polishing, welds polishing to Ra 0.6μm;
  • Tangential port
  • Sight glass
  • PT100 Temperature sensor probe;
  • Glass manhole(glass): Φ500mm;
  • CIP spray ball

HLT

  • Volume + ~10% headspace
  • Inner-shell (SUS304L), thickness: 3.0mm;
  • External-shell (SUS304L), thickness: 2.0mm;
  • Oval cone thickness: 3.0mm;
  • Insulation: Rockwool-thickness: 80mm;
  • Matte finish, welds polishing to Ra 0.6μm;
  • Sight glass
  • PT100 Temperature sensor probe;
  • Top manhole
  • CIP spray ball

CLT

  • Volume + ~10% headspace
  • Inner-shell (SUS304L), thickness: 3.0mm;
  • External-shell (SUS304L), thickness: 2.0mm;
  • Oval cone thickness: 3.0mm;
  • Insulation: Rockwool-thickness: 80mm;
  • Matte finish, welds polishing to Ra 0.6μm;
  • Sight glass
  • PT100 Temperature sensor probe;
  • Top manhole
  • CIP spray ball

STANDARD ACCESSORIES

  • Platform / steps based on brewhouse size / HDPE Floor (choice of green or yellow color)
  • Piping which includes : stainless steel handle squeeze trigger valves, clamps & seal
  • Heat exchanger
  • Topline Pumps